Micron 304 and 316 Stainless Steel Mesh Screen Pack Filter Discs for Fine Filtration

ZhongPu Wire Mesh Co., Ltd. offers customized stainless steel wire mesh products in a wide range of special specifications. Customers with specific requirements are welcome to contact us at any time.

Our recent customized specifications are as follows:

40 Micron Stainless Steel 316 Wire Mesh for Air Filtration

Micron stainless steel wire mesh is a fine-aperture filtration medium manufactured with precision wire and uniform openings. It is commonly used for air filtration and is available as woven micron wire mesh and sintered micron wire mesh.

• Materials: stainless steel grades 201, 202, 304, 304L, 316, 316L, 321, 430
• Standard Sizes: roll width 1.0 m to 1.22 m (40–48 inches), roll length 30 m to 100 m, mesh count 1–635 mesh, wire diameter 0.05–1.50 mm (commonly 0.25–0.80 mm)
• Weave Structures: plain square weave, twilled square weave, plain Dutch weave, and twilled Dutch weave are available to meet different filtration accuracy and airflow requirements.
• Sintered Micron Mesh: multi-layer sintered wire mesh is produced by compressing and vacuum-sintering 2–12 layers of stainless steel wire mesh. The filtration rating ranges from 0.5 micron to 300 microns, providing higher strength and stable filtration performance.

316 SS Wire Mesh, 50 micron mesh size, in a roll width of 36” at 25 ft. long

• Mesh Size: 50 micron filtration rating for fine particle filtration
• Roll Dimensions: roll width 36 inches (914 mm), roll length 25 feet (7.62 m)
• Material: 316 stainless steel wire mesh offering corrosion resistance and consistent filtration performance

SS304 Stainless Steel Wire Mesh for Fine Filtration Applications

This SS304 wire mesh with a 10 micron aperture (1250 mesh) is designed for precision filtration applications requiring uniform pore size and corrosion resistance.

• Material: stainless steel SS304, AISI Type 304
• Filtration Size: aperture size 10 micron filtration rating, equivalent mesh count 1250 mesh
• Wire Specification: wire diameter as per standard for 1250 mesh micron wire mesh
• Roll Width: 1000 mm (1.0 m)

General Weaving Patterns of Stainless Steel Wire Mesh and Wire Cloth

• Plain Weave: uses a simple over-and-under wire structure. It is commonly produced in mesh counts from 1 to 400 mesh, with wire diameters ranging from 0.03 mm to 2.0 mm.
• Twill Weave: features an over-two and under-two wire pattern. It supports mesh counts from 200 to 635 mesh and allows the use of thicker wire, typically 0.02 mm to 0.50 mm.
• Dutch Plain Weave: combines thicker warp wires with finer weft wires. It is designed for filtration ratings from approximately 10 microns to 200 microns, with mesh equivalents between 50 and 400 mesh.
• Dutch Twill Weave: uses a twill pattern with different wire diameters in warp and weft directions. It is suitable for ultra-fine filtration below 10 microns, typically 1 to 10 microns.

4 and 7 Micron Stainless Steel Wire Screen Surface Filter Element

• Filtration Rating: 4 micron and 7 micron surface filtration for oil particle removal
• Mesh Size: fine mesh structure for 4 micron and 7 micron filtration accuracy
• Filter Type: stainless steel wire screen surface filter element
• Application: oil filtration for industrial and hydraulic systems
• Operating Pressure: working pressure from 6 to 10 bar
• Operating Temperature: operating range from 50 °C to 200 °C
• Material: stainless steel wire for corrosion resistance and durability
• Screen Width: minimum width 1200 mm for industrial filtration

stainless steel perforated tube filter mesh cylindrical filtration element

• Material: SS304, SS316, SS316L
• Structure: Cylindrical perforated tube with rolled and welded construction,Smooth surface with evenly distributed perforations
• Hole Pattern: Round perforations,Uniform hole spacing for consistent filtration performance
• Tube diameter: customizable (commonly 50–300 mm)
• Tube length: customizable (commonly 100–1000 mm)
• Sheet thickness: 0.5–3.0 mm
• Hole diameter: 1.0–10.0 mm
• Open area: approximately 20%–60% depending on hole size and pitch

Stainless Steel Extruder Screen Packs Filter Discs

Material: Stainless steel grades 304 or 316, offering corrosion resistance and stable filtration performance.

Layer Structure:Three-layer screen pack configuration:

• 1st layer: 20 mesh × 0.355 mm wire
• 2nd layer: 80 mesh × 0.14 mm wire
• 3rd layer: 20 mesh × 0.355 mm wire

Disc Diameter: Standard diameter 50.8 mm (2 inches).

Edge Type: Aluminum sheet hemming (AL plech) for structural support and secure sealing.

Wire Mesh Filter Disc Stainless Steel 304 316 for Polymer and Hydraulic Filtration

304 316 wire mesh filter discs with aluminum rings in multiple diameters and mesh sizes for filtration

• Material Options: Stainless steel 304, 316, 316L
• Mesh Type: Plain weave, twill weave, Dutch weave
• Filtration Rating: 5 μm – 500 μm
• Mesh Count Range: 20 – 400 mesh
• Wire Diameter: 0.03 – 0.50 mm
• Disc Diameter: 20 – 300 mm
• Thickness: 0.2 – 3.0 mm
• Edge Treatment: Aluminum ring, stainless steel ring, spot welded edge
• Disc Shape: Round (custom shapes available)
• Structure: Single-layer or multi-layer laminated
• Operating Temperature: Up to 500 °C
• Typical Applications: Polymer extrusion, hydraulic filtration, oil and gas filtration

Stainless Steel Wire Mesh Screen and Wire Cloth, Plain Weave


ss304 ss316 plain weave wire mesh industrial screening for filtration

Reverse Dutch Weave Wire Mesh for Fine Filtration Stainless Steel 304 316

Reverse Dutch weave wire mesh made from SS304 or SS316 for high-pressure fine filtration